YEAR |
MODEL |
DESCRIPTION |
PART # |
PRICE |
CART |
68-69 |
AMX, Javelin (V8 with 4 speed) |
Clutch Kit (NEW) - 10 1/2" - includes pressure plate, disc, throwout bearing, pilot bushing, alignment tool. |
|
$225.00 |
|
70-71 |
AMX, Javelin (V8) |
Clutch Kit (NEW) - 10 1/2" - includes pressure plate, disc, throwout bearing, pilot bushing, alignment tool. |
|
$225.00 |
|
68-74 |
Javelin (199, 232, 258) |
Clutch Cover - New, not rebuilt - 9 1/8" |
|
$249.00 |
|
68-71 |
AMX, Javelin (V8 with 4 speed) |
Clutch Disc (10 1/2") |
|
$89.00 |
|
68-74 |
V8 w/4 speed |
Clutch Alignment Tool - for 1 1/8" input shaft w/10 splines |
|
$5.95 |
|
68-74 |
AMX, Javelin (V8) |
Clutch Pressure Plate Bolt Kit |
|
$39.00 |
|
71-74 |
AMX, Javelin |
Clutch Lever Spring |
|
$5.00 |
|
68-70 |
AMX, Javelin (with replacement throwout lever) |
Clutch Lever Spring (see above photo) |
|
$5.00 |
|
74 |
AMX, Javelin (except with T10) |
Clutch Lever Spring - 1 req |
|
$3.00 |
|
68-74 |
AMX, Javelin |
Clutch Pedal Bushing - 2 required |
|
$3.50 |
|
68-74 69-74 |
AMX, Javelin V8 Javelin Six |
Clutch Lever Boot |
|
$9.50 |
|
68 |
Javelin Six |
Clutch Lever Boot - NOTE: fits 2" X 3 1/4" opening in bell housing. |
|
$9.50 |
|
68-69 |
AMX, Javelin (V8) |
Throwout Bearing (w/sleeve) |
|
$59.00 |
|
70-74 68-74 70-73 |
AMX, Javelin (V8) Javelin Six Six |
Throwout Bearing (w/sleeve) |
|
$58.00 |
|
68-71 68-71 |
AMX, Javelin (V8) Javelin (199, 232, 258) |
Pilot Bushing |
|
$8.00. |
|
72-74 |
AMX, Javelin (V8) |
Pilot Bushing |
|
$6.00 |
|
74 |
AMX, Javelin (SIX - 304) |
Pilot Bushing |
|
$3.00 |
|
70-74 |
All (WMT - exc FOUR) |
Pilot Bushing Wick - (Supplies lubricant to pilot bushing. Replace with bushing.) |
|
$5.00 |
|
68-70 71-74 |
AMX, Javelin (V8) AMX, Javelin |
Throwout Lever |
|
$29.00 |
|
68-69 |
V8 |
Throwout Lever Pivot Bolt - 1 required |
|
$18.00 |
|
70-71 |
V8 |
Throwout Lever Pivot Bolt - 1 required |
|
$18.00 |
|
72-74 |
360-401 |
Throwout Lever Pivot Bolt - 1 required |
|
$18.00 |
|
68-74 |
AMX, Javelin |
Throwout Lever Pivot Ball |
|
$2.00 |
|
68-71 |
V8 |
Manual Transmission Bell Housing Spacer - Excellent reproduction. |
|
$49.00 |
|
72-74 |
AMX, Javelin |
Bell Housing Spacer (bell housing to block) |
|
$25.00 |
|
70-71 |
Six |
Bell Housing Spacer |
|
$35.00 |
|
68-74 72-74 |
V8 Six |
Bellhousing Bolt Kit - stainless steel / 18 pieces |
|
$25.00 |
|
72-74 |
All (except FOUR) |
Bellhousing Cover (for front lower section of bellhousing) - Used. Sand blasted & painted. |
|
$35.00 |
|
68-69 |
AMX, Javelin |
|
$69.00 |
|
|
68-70 |
AMX, Javelin |
Pedal Stop Jam Nut Kit |
|
$2.50 |
|
68-69 L70-74 |
AMX, Javelin All Bellcrank to Strut Rod Bracket Only |
Clutch Linkage Spring Clip Reproduction in spring steel as original. 3 required. |
|
$10.00 |
|
70-74 |
AMX, Javelin |
Rod Retainer (hairpin type) |
|
$1.00 |
|
68-72 |
AMX, Javelin |
Spring Washer |
|
$1.00 |
|
72-74 |
AMX, Javelin |
Spring Washer |
|
$2.00 |
|
68-69 69 |
AMX, Javelin (w/4 speed) Javelin (232-290 w/3 speed floor shift) |
Clutch Bellcrank - Nice reproduction of the original. Includes grease fitting. |
|
$109.00 |
|
70-74 |
AMX, Javelin |
Clutch Bellcrank - Excellent reproduction. |
|
$109.00 |
|
68-69 |
AMX, Javelin |
Clutch Bellcrank Outer Ball Stud Kit - Excellent reproduction. Includes mounting hardware. |
|
$29.00 |
|
68-74 |
AMX, Javelin |
Inner Bellcrank Boot |
|
$6.00 |
|
68-74 |
AMX, Javelin |
Outer Bellcrank Boot |
|
3.00 |
|
68-74 |
AMX, Javelin |
Clutch Rod Inner Firewall Seal - 1 required |
|
$5.00 |
|
68-69 |
AMX, Javelin |
Clutch Bellcrank Clip |
|
$4.50 |
|
70-74 |
AMX, Javelin |
Clutch Rod Firewall Boot Screw Kit |
|
$4.00 |
|
68-69 |
Javelin (232) |
Clutch Bellcrank Inner Pivot Bracket |
|
$20.00 |
|
68-74 |
AMX, Javelin |
Clutch Bellcrank Inner Bracket Bolt Kit |
|
$1.00 |
|
68-74 |
AMX, Javelin |
Clutch Bellcrank Pivot Bushing |
|
$1.50 |
|
70-74 |
All |
Outer Bellcrank Bushing Exact duplicate. Made from Delrin like original. 1 required |
|
$25.00 |
|
68-69 |
AMX, Javelin V8 |
Inner Clutch Bellcrank Bracket - bolts to bellhousing |
|
$29.00 |
|
68-69 |
AMX, Javelin |
Clutch Bellcrank Inner Stud - Excellent reproduction made with non-magnetic type 304 stainless steel on a CNC lathe. Includes correct jam nut and lock washer also in stainless steel. |
|
$29.00 |
|
70-74 |
AMX, Javelin V8 |
Inner Clutch Bellcrank Bracket - Excellent reproduction |
|
$49.00 |
|
68-74 |
AMX, Javelin |
Clutch Lever Spring (3 5/8" long) |
|
$7.50 |
|
70-74 |
AMX, Javelin |
Clutch Linkage Rod End |
|
$3.25 |
|
68-74 |
AMX, Javelin |
Clutch Linkage Lower Rod End Foam Seal |
|
$3.00 |
|
68-74 |
AMX, Javelin |
Brake & Clutch Pedal Pad - 2 required |
|
$20.00 |
|